skyworks solutions, inc. ? phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200049 rev. d skyworks proprietary information products and product information are subject to change without notice. february 15, 2005 1 SMP1322 series: low resistance plastic packaged pin diodes data sheet skyworks offers lead (pb)-free ?environmentally friendly? packaging that is rohs compliant (european parliament for the restriction of hazardous substances). new features designed for high performance wireless switch applications r s @ 1 ma 0.8 ? typical available lead (pb)-free msl-1 @ 250 c per jedec j-std-020 available in tape and reel packaging description the SMP1322 series of plastic packaged, surface mountable pin diodes are designed for high volume switch applications from 10 mhz to beyond 2 ghz. the ultra low resistance of these diodes (1.5 ? maximum at 1 ma and 0.5 ? typical at 10 ma) make the SMP1322 series particularly suited to low loss pin diode switches in battery operated circuits. available in a selection of plastic packages and in a variety of configurations including an ultra low inductance (0.2 nh) sot-143 (SMP1322-017), the small footprint sc-79 and the miniature sc-70. in addition, the SMP1322-016 consists of 2 diodes in a sot-143 package con- figured to enable insertion in a quarter-wave t/r switch with no crossover connections. characteristic value reverse voltage (v r ) 50 v power dissipation @ 25 c lead 250 mw temperature (p d ) storage temperature (t st ) -65 c to +150 c operating temperature (t op ) -65 c to +150 c esd human body model class 1b absolute maximum ratings performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the absolute maximum specifications. exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. caution: although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this device must be protected at all times from esd. static charges may easily produce poten- tials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions must be employed at all times.
skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com february 15, 2005 skyworks proprietary information products and product information are subject to change without notice . 200049 rev. d data sheet ? SMP1322 series 2 lf denotes lead (pb)-free packaging option as an alternative to our standard tin/lead (sn/pb) packaging. single common anode common cathode series pair sot-23 sot-23 sot-23 sot-23 SMP1322-001 SMP1322-003 SMP1322-004 SMP1322-005 marking: pn1 marking: pn9 marking: pn3 marking: pn2 SMP1322-001lf SMP1322-003lf SMP1322-004lf SMP1322-005lf marking: rn1 marking: rn9 marking: rn3 marking: rn2 l s = 1.5 nh l s = 1.5 nh l s = 1.5 nh l s = 1.5 nh sc-70 sc-70 SMP1322-074 marking: pn3 SMP1322-074lf marking: rn3 l s = 1.4 nh lf denotes lead (pb)-free packaging option as an alternative to our standard tin/lead (sn/pb) packaging. single t/r switch ultra low inductance single sod-323 sot-143 sot-143 sc-79 SMP1322-011 SMP1322-016 SMP1322-017 SMP1322-079 marking: pn marking: pn6 marking: pnf SMP1322-011lf SMP1322-017lf SMP1322-079lf marking: rn marking: rnf l s = 1.5 nh l s = 1.5 nh l s = 0.2 nh l s = 0.7 nh parameter condition typ. max. unit reverse current (i r )v r = 50 v 10 a capacitance (c t ) (1) f = 1 mhz, v = 30 v 1.0 pf resistance (r s ) f = 100 mhz, i = 1 ma 1.5 ? resistance (r s ) f = 100 mhz, i = 10 ma 0.50 ? forward voltage (v f )i f = 10 ma 0.85 v carrier lifetime (ti) i f = 10 ma 0.40 s i region width 8.00 m electrical specifications at 25 c 1. the SMP1322-016, SMP1322-017 and SMP1322-017lf maximum capacitance is 1.15 pf.
data sheet SMP1322 series skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200049 rev. d skyworks proprietary information products and product information are subject to change without notice. february 15, 2005 3 series resistance vs. current @ 100 mhz 0.1 0.01 0.1 1 10 100 1 10 100 forward current (ma) series resistance ( ? ) 0 1 2 5 10 20 50 capacitance vs. reverse voltage 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 reverse voltage (v) capacitance (pf) 1 mhz?1 ghz 400 500 600 700 800 900 1000 dc characteristic 0.01 0.1 1 10 100 forward voltage (mv) forward current (ma) 0 500 1000 1500 2000 conductance vs. frequency and reverse voltage 0 500 1000 1500 2000 2500 3000 frequency (mhz) conductance ( s) 0 v 10 v 40 v typical performance data
skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com february 15, 2005 skyworks proprietary information products and product information are subject to change without notice . 200049 rev. d data sheet SMP1322 series 4 25 20 15 10 5 0 0.5 1 2 34 frequency (ghz) SMP1322-017 typical spst switch performance loss (db) zero bias i f = 10 ma antenna receiver transmitter bias /4 antenna receiver gnd transmitter bias /4 43 12 /4 t/r switch SMP1322-016 in /4 t/r switch SMP1322-016 sot-143 t/r switch the SMP1322-016 is a low cost pin diode unconnected pair specifically designed for low current drain antenna t/r switches in hand held wireless suits. in the specifically configured sot-143 package, the pin diodes are oriented to enable connec- tion as a /4 switch with no external crossover connections. transmitter SMP1322-011 antenna dc control receiver SMP1322-017 /4 t/r switch design rrr r r i f -55 c -15 c +25 c +65 c +100 c (ma) ( ? ? )( ? ? )( ? ? )( ? ? )( ? ? ) 0.02 9.500 9.400 9.900 10.500 10.900 0.10 3.000 3.000 3.000 3.300 3.500 0.30 1.500 1.500 1.500 1.600 1.800 0.50 1.100 1.100 1.200 1.200 1.400 1.00 0.922 0.914 0.902 0.963 1.100 10.00 0.568 0.559 0.533 0.563 0.655 20.00 0.532 0.520 0.494 0.521 0.610 100.00 0.483 0.469 0.440 0.464 0.565 resistance vs. temperature @ 500 mhz SMP1322-017 sot-143 low inductance pin diode the SMP1322-017 utilizes the SMP1322 pin diode chip in a customized sot-143 plastic package designed for high isolation performance in a shunt connected switch. its effective inductance, based on the 3 ghz isolation, is less than 0.2 nh. this diode is designed to work effectively as a shunt element in spdt switches, covering the wireless frequencies from 900 mhz to beyond 2 ghz. excellent performance is achievable when used in a quarter-wave t/r switch with the SMP1322-001 (sot-23) or SMP1322-011 (sod-323) pin diode as the series connected diode. 4 13 2 4 3 1 2 43 12 schematic switch connection lead configuration
data sheet SMP1322 series skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200049 rev. d skyworks proprietary information products and product information are subject to change without notice. february 15, 2005 5 sot-23 3 2 1 0.035 (0.89 mm) min. 0.044 (1.12 mm) max. 0.0005 (0.01 mm) min. 0.004 (0.10 mm) max. 0.012 (0.30 mm) min. 0.020 (0.50 mm) max. 0.003 (0.080 mm) min. 0.008 (0.20 mm) max. 8? max. 0.022 (0.55 mm) ref. 0.110 (2.80 mm) min. 0.120 (3.04 mm) max. 0.083 (2.10 mm) min. 0.104 (2.64 mm) max. 0.037 (0.95 mm) ref. 0.047 (1.20 mm) min. 0.055 (1.40 mm) max. 0.076 (1.92 mm) ref. 0.020 (0.51 mm) ref. sot-143 0.110 (2.80 mm) min. 0.120 (3.04 mm) max. 0.083 (2.10 mm) min. 0.104 (2.64 mm) max. 0.012 (0.30 mm) min. 0.020 (0.50 mm) max. 0.0005 (0.01 mm) min. 0.004 (0.15 mm) max. 0.031 (0.80 mm) min. 0.047 (1.20 mm) max. 0.030 (0.76 mm) min. 0.035 (0.89 mm) max. 0.047 (1.20 mm) min. 0.055 (1.40 mm) max. 0.003 (0.08 mm) min. 0.008 (0.20 mm) max. 0.022 (0.55 mm) ref. 8? max. 0.020 (0.50 mm) ref. 0.028 (0.70 mm) ref. 0.068 (1.72 mm) ref. 0.076 (1.92 mm) ref. 4 3 2 1 sod-323 0.090 (2.30 mm) min. 0.108 (2.74 mm) max. 0.045 (1.15 mm) min. 0.053 (1.35 mm) max. 0.050 (1.25 mm) max. 0.006 (0.15 mm) typ. 0.008 (0.20 mm) nom. 0.004 (0.10 mm) max. 0.010 (0.25 mm) min. 0.010 (0.25 mm) min. 0.016 (0.40 mm) max. 0.063 (1.60 mm) min. 0.071 (1.80 mm) max. cathode indicator 2 1 sc-79 0.060 (1.50 mm) min. 0.067 (1.70 mm) max. 0.010 (0.25 mm) min. 0.014 (0.35 mm) max. 0.043 (1.10 mm) min. 0.051 (1.30 mm) max. 0.020 (0.50 mm) min. 0.028 (0.70 mm) max. 0.003 (0.07 mm) min. 0.008 (0.20 mm) max. 10? max. 10? max. 0.028 (0.70 mm) min. 0.035 (0.90 mm) max. 0.006 (0.15 mm) min. cathode indicator 12 sc-70 3 2 1 0.031 (0.80 mm) min. 0.039 (1.00 mm) max. 0.000 (0.00 mm) min. 0.004 (0.10 mm) max. 0.010 (0.25 mm) min. 0.016 (0.40 mm) max. 0.071 (1.80 mm) min. 0.087 (2.20 mm) max. 0.071 (1.80 mm) min. 0.094 (2.40 mm) max. 0.045 (1.15 mm) min. 0.053 (1.35 mm) max. 0.026 (0.65 mm) ref. 0.051 (1.30 mm) ref. 0.004 (0.10 mm) min. 0.007 (0.18 mm) max. 0.004 (0.10 mm) min. 0.012 (0.30 mm) max. 0.014 (0.35 mm) ref. recommended solder reflow profiles refer to the ?recommended solder reflow profile? application note.
skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com february 15, 2005 skyworks proprietary information products and product information are subject to change without notice . 200049 rev. d data sheet SMP1322 series 6 copyright ? 2002, 2003, 2004, 2005, skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyworks solutions, inc. (?skyworks?) products. these materials are pr ovided by skyworks as a service to its customers and may be used for informational purposes only by the customer. skyworks assumes no responsibility for errors or omissions in these materi als. skyworks may make changes to its documentation, products, specifications and product descriptions at any time, without notice. skyworks makes no commitment to update the information and s hall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product de scriptions. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document . except as may be provided in skyworks terms and conditions of sale for such products, skyworks assumes no liability whatsoever in association with its documentation, products, specifications a nd product descriptions. these materials are provided ?as is? without warranty of any kind, either express or implied or otherwise, relating to sale and/or use of skyworks products including warranties relating to fitness for a particular purpose, merchantability, performance, quality or non-infringement of any patent, c opyright or other intellectual property right. skyworks further does not warrant the accuracy or completeness of the information, text, graphics or other items c ontained within these materials. skyworks shall not be liable for any damages, including special, indirect, incidental, or consequential damages, including without l imitation, lost revenues or lost profits that may result from the use of these materials whether or not the recipient of materials has been advised of the possi bility of such damage. skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. skyworks customers using or se lling skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. the following are trademarks of skyworks solutions, inc.: skyworks ? , the skyworks logo, and breakthrough simplicity ? . product names or services listed in this publication are for identification purposes only, and may be trademarks of skyworks or other third parties. third-party brands and names are the property of their r espective owners. additional information, posted at www.skyworksinc.com, is incorporated by reference.
|
